CODESYS - the IEC 61131-3 automation software

Welcome to the official CODESYS Forum by 3S-Smart Software Solutions GmbH | A member of the CODESYS Group
Deutsche Version English version russian version 
It is currently Sun Feb 17, 2019 11:09 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Mon May 02, 2016 7:34 am 
Offline

Joined: Fri Apr 29, 2016 7:07 am
Posts: 7
Good morning,
I'm a newby to codesys (V3.5.7), I'm currently reading the 'input variable' by modbus by using the slave modbus/Channel slave modbus/Read Holding Registers and declaring them in global variable.
I can write on this node as well by using 'Write Multiple Register' but I need to write the value only when I change it, not cyclically.
To better explain, I have a net in which the same value should be written from local (plc on the machine) or remote (plc controlled by codesys). I have to maintain the last value written (from local or from remote, same importance). I'm sure it should be done quickly but I can't find the solutions. Any suggestions?


Top
   
PostPosted: Mon May 02, 2016 2:18 pm 
Offline

Joined: Fri Aug 07, 2015 9:59 pm
Posts: 57
Hi
i think you should be able to do it with the 'Rising Edge'. You just Need a variable that would be triggered when the Value changes and this could be mapped to the 'Rising Edge' variable.


You do not have the required permissions to view the files attached to this post.


Top
   
PostPosted: Mon May 02, 2016 3:47 pm 
Offline

Joined: Fri Apr 29, 2016 7:07 am
Posts: 7
Thankyou very much for the respons.

I made something like this:

2 writing, one is for the trigger variable and the other for the value I want to change.
1 reading, that is pointed to the same value of the second reading.

I was espected that if I put one on the trigger variable (which come to true), the value on the writing should pass to the reading as well. But no way to connect the trigger variable to the action that identify the changing of the value on the plc?

Thank you very much.


Top
   
PostPosted: Mon Feb 11, 2019 5:37 pm 
Offline

Joined: Wed Jul 11, 2018 10:44 am
Posts: 12
Hello,
I would like to do smt simmilar.. I want to save value everytime it changes and cyclicly every 15 min for ex.. How i detect change? Did you succed to write program for it?
Thank you.


Top
   
PostPosted: Tue Feb 12, 2019 2:36 pm 
Offline
Frequent User
Frequent User

Joined: Fri Feb 23, 2018 3:41 pm
Posts: 100
just read the source variable cyclically to know the value. Then compare with one you previously saved. If values are different, then trigger your write.


Top
   
PostPosted: Fri Feb 15, 2019 8:44 am 
Offline

Joined: Wed Jul 11, 2018 10:44 am
Posts: 12
Well.. I have problem with comparing bytes. With BOOL variable works fine:
IF NOT new = Old THEN
Save := TRUE;
Old := New;
END_IF

With BOOL All good, Save goes TRUE but with BYTE not.. Nothing happens.. Any ideas?

Update: I used memcmp and memcpy. It works now.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited