Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
-Is it possible to assign a Usb drive as the default storage path for the SQlite Trend.
My CodesysControl.cfg looks as under : [CmpRetain]
Retain.SRAM.Size=0x1C000
Retain.SRAM.AddressMapped=0x75CEF000
Hi Forum,
A few questions regarding Sqlite Trend
-Is it possible to assign a Usb drive as the default storage path for the SQlite Trend.
My CodesysControl.cfg looks as under :
[CmpRetain]
Retain.SRAM.Size=0x1C000
Retain.SRAM.AddressMapped=0x75CEF000
[SysTarget]
DeviceName=ECC2200 0.8S 1131
VendorName=Berghof Automation GmbH
TargetVersion=
[CmpApp]
RetainType.Applications="InSRAM"
[SysFileMap]
/home/plc/applications/visu/.svg
/home/plc/applications/visu/.png
/home/plc/applications/visu/*.png
...
-Is it possible to load an Sqlite Trend file which exists on the disk to Visualization.I am using V3.5.6.
Thanks & regards