Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Status:
In our company we use LTi Servo controllers, wich include a Codesys PLC.
Our company network is something like: 192.168.33.x
Machine subnet ist: 192.168.44.y
With a NAT on the machine's gateway, we can access every item of the 192.168.44.y subnet, by connecting to 10.A.B.y from anywhere inside our company. (Where A.B is the machine's number) [For remote maintenance of our machines remote we use a VPN server, which every online machine connects to.
In order to connect to any PC/drive/... without further configuration the 10.0.0.0 subnet is redirected to the VPN server.]
We can connect to the server controllers over TCP (with the vendor's "drive manager" software)
Questions:
1. How would we need to configure CoDeSyS gateway (with the gateway running on the same PC in the company subnet) to access the servo
a) over UDP (Error: no adapter with the subnet ... found)
b) over TCP
without broadcast traffic?
Greetings from Austria,
Team
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Dear Sir or Madam,
Status:
In our company we use LTi Servo controllers, wich include a Codesys PLC.
With a NAT on the machine's gateway, we can access every item of the 192.168.44.y subnet, by connecting to 10.A.B.y from anywhere inside our company. (Where A.B is the machine's number)
[For remote maintenance of our machines remote we use a VPN server, which every online machine connects to.
In order to connect to any PC/drive/... without further configuration the 10.0.0.0 subnet is redirected to the VPN server.]
We can connect to the server controllers over TCP (with the vendor's "drive manager" software)
Questions:
1. How would we need to configure CoDeSyS gateway (with the gateway running on the same PC in the company subnet) to access the servo
a) over UDP (Error: no adapter with the subnet ... found)
b) over TCP
without broadcast traffic?
Greetings from Austria,
Team