Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
A.Communication between a Schneider IPC-Box with codesys application and a proface HMI.
The proface is a matter because we want to receive data of 7 IPC Box.
The communication actually is ok if the proface is slave.
To communicate with a master PROFACE is the library with MODBUSSERVER useful?
And how we proceed to dowload it?
B.Communication between a Schneider IPC_BOX with SIEMENS PLC in PROFINET Network.
Is it possible or not?
Thanks
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
I have 2 subjects.
A.Communication between a Schneider IPC-Box with codesys application and a proface HMI.
The proface is a matter because we want to receive data of 7 IPC Box.
The communication actually is ok if the proface is slave.
To communicate with a master PROFACE is the library with MODBUSSERVER useful?
And how we proceed to dowload it?
B.Communication between a Schneider IPC_BOX with SIEMENS PLC in PROFINET Network.
Is it possible or not?
Thanks