CODESYS - the IEC 61131-3 automation software

Welcome to the official CODESYS Forum by 3S-Smart Software Solutions GmbH | A member of the CODESYS Group
Deutsche Version English version russian version 
It is currently Thu Oct 24, 2019 5:46 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Fri Sep 20, 2013 9:49 am 
Offline

Joined: Thu Sep 19, 2013 3:06 pm
Posts: 3
Hi All,
First af all, I am completely new about Wago and Canopen communication protocol.
I have Wago 762-2035 touch panel (Canmaster) and a Stoeber motor driver with Canopen option card (Slave). Wago software version: 2.3.9.35. I already install driver's .eds file in the correct place of Wago Software.

How can I make a program for reach/get some information (speed, working time, current, vs.) on the driver in real time?
Or could you please send me an example program about communication between Codesys and any mark Motor Driver?

Thanks in advance.


Top
   
PostPosted: Fri Sep 20, 2013 1:02 pm 
Offline
Frequent User
Frequent User
User avatar

Joined: Tue Jun 06, 2006 9:03 am
Posts: 410
Add the CAN master to your PLC in the PLC configuration.
Then add your drive to the CAN master.
In the properties of your drive you can see which variables are read/written.
CODESYS will automatically create input and output adresses for this.


Top
   
PostPosted: Fri Sep 27, 2013 4:14 pm 
Offline

Joined: Thu Sep 19, 2013 3:06 pm
Posts: 3
Dear Mr TimvH,

Do you have an example for this subject?

Thank you.


Top
   
PostPosted: Fri Sep 27, 2013 4:33 pm 
Offline
Frequent User
Frequent User
User avatar

Joined: Tue Jun 06, 2006 9:03 am
Posts: 410
An example should be able to be found on internet.
My first google search gave me the following link:
http://www.wago.com/wagoweb_china/publi ... 00_0en.pdf
In chapter 4 is some information which could be helpfull.

If you don't understand this, please contact your supplier or Wago for a training.


Top
   
PostPosted: Mon Sep 30, 2013 1:44 pm 
Offline

Joined: Thu Sep 19, 2013 3:06 pm
Posts: 3
Thank you for your helping. MR. TimvH.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited