Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

Conversion from CoDeSys 2 to CoDeSys 3

conoscenza
2013-09-20
2013-10-17
  • conoscenza - 2013-09-20

    Hello guys,
    there is the possibilty to "convert" automatically a project from CoDeSys2 to CoDeSys3?
    If yes, how to do that?

    ...I suppose that it is impossible... but the hope is last to die!

    Thank you for your answer

     
  • t.lundahl - 2013-09-20

    Hi!

    I know that Festo have a converting tool in there pakage, but I have not used it or even started it.
    I also think that this is something that 3S have made.

    You can download Codesys V3 ISO from Festo.

    /TorbjΓΆrn

     
  • conoscenza - 2013-09-20

    Does it works also in demo mode?
    Or Festo's CoDeSys is free?

     
  • t.lundahl - 2013-09-20

    Festo is free like 3S.

     
  • TimvH

    TimvH - 2013-09-20

    It is very easy. You can open the V2.3 project in V3. V3 then automatically converts it.
    Choose, "file open" and select the V2.3 project (project before 3.0).

     
  • opa177 - 2013-10-09

    Is there anything special with the libraries? I can open some projects, but some of them are not working. It reminds me that i have to convert libraries/open existing one...

     
  • TimvH

    TimvH - 2013-10-09

    Yes, off course there will be changes necessary.
    You will need to understand how your application is setup and which libraries need to be added/changed.
    Besides this you will probably need to configure your I/O again.

     
  • conoscenza - 2013-10-17

    Thank you at all for your reply!

     

Log in to post a comment.