Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Does someone know what kind of alternative there is for the CST tool to work on Linux? At the moment we're using the tool to control our wago plc (uploading bins, start, stop and resetting). But we need to have it working on a Linux computer within a relative short timespan (2 weeks).
If there is no good alternative available, is some maybe able to comment on the protocol used between cst/gateway and the plc to control it? We've been looking for documentation on the tcp/2455 protocol but were not succesfull to find any information. If someone can help us, we are very thankful.
Best
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello all,
Does someone know what kind of alternative there is for the CST tool to work on Linux? At the moment we're using the tool to control our wago plc (uploading bins, start, stop and resetting). But we need to have it working on a Linux computer within a relative short timespan (2 weeks).
If there is no good alternative available, is some maybe able to comment on the protocol used between cst/gateway and the plc to control it? We've been looking for documentation on the tcp/2455 protocol but were not succesfull to find any information. If someone can help us, we are very thankful.
Best