Author |
Message |
anheller
|
PostPosted: Mon Feb 04, 2019 1:49 pm |
|
Joined: Sun Mar 20, 2016 9:04 pm Posts: 1
|
Hello,
I'm trying to understand the data exchanged via TCP/IP between Codesys V2.3 and a gateway on another Windows computer. I recorded the communication with Wireshark but can not identify the protocol.
The TCP/IP data packets at login look like this: Codesys to the gateway: dddd0000000000000000010000000500000042ec83371d Response from the gateway: eeee00000000010000000100000000000000 From the gateway message is passed on to a PCAN USB, there comes out the following: ID=0x67E, Data=0x21 0x25 0x10 0x01 0x05 0x00 0x00 0x00
My goal is to implement an Ethernet CAN gateway on a single board computer with CAN interface (Raspi or ESP32).
Thanks, Andy
You do not have the required permissions to view the files attached to this post.
|
|
Top |
|
 |