Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

Create something like a "disk image"

Shutdown
2018-03-11
2018-04-03
  • Shutdown - 2018-03-11

    Hi to everybody.

    I own two Wago PLCs with several I/O boards.
    One has a 750-880 controller, the other a 750-849. They are both 2012/13 systems and are perfectly working.
    The OEM who wrote the software does not exists anymore. My company does not have a copy of the software …….

    My question : is there a way to create something like a β€œdisk image” of each controller to download to two identical systems to be used as backups ?

    Many thanks in advance.

     
  • maniek765 - 2018-04-03

    You might be able to do a backup by inserting a SD card, and using PLC's web-interface and/or Ethernet Setting software to make a backup. I never tried it, but I read somewhre that it's possible.

    There is also an app called WAGOUpload which might be able to do what you need.

    But, the simplest: have you tried opening the PLC in codesys?

     

Log in to post a comment.