Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I am fielding IFM CR0032 & CR2530 PLCs with the requirement that they be updated from Linux. So I need to replicate the CoDeSys v2.3 capability to download/create boot project; or the IFM Maintenance application's capability to write an resx file to a PLC. Wine libraries or VM are not available options for me. I can study the CAN bus traffic that results from writing an resx file to a PLC (objects 0x1025 & 0x1F50) but this won't tell me how checksumming is performed, and the format of status from the PLC. Has anyone faced this problem?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I am fielding IFM CR0032 & CR2530 PLCs with the requirement that they be updated from Linux. So I need to replicate the CoDeSys v2.3 capability to download/create boot project; or the IFM Maintenance application's capability to write an resx file to a PLC. Wine libraries or VM are not available options for me. I can study the CAN bus traffic that results from writing an resx file to a PLC (objects 0x1025 & 0x1F50) but this won't tell me how checksumming is performed, and the format of status from the PLC. Has anyone faced this problem?
I have asked IFM for technical support, but they are not responding quickly.
Hi mccabehm,
do you have any update on your request? I am also interested on what you try to do.
Regards