Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I have setup me first project with Codesys 3.5 for Codesys 3.5.8 Softmotion RTE 64
But with the Target Visu given me Problems.
She not show images.
On the Engineering System I can see the Visu with frame’s and images but un the Target only
Text , Lines, rectangles.
The Functions behind the frames is on the Target active. (Push Button is working).
This Problem I have with the project written from me but with the Codesys Examples too.
On the Target PC I found me Images on:
C:\Program Files\3S CODESYS\CODESYS Control RTE3\PlcLogic\visu
That means I have send this Data from me engineering PC to the Target PC.
What I doing wrong?
Way the differed between engineering system and Target?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
this should work without problems.
1.Please check with the codesys filebrowser if you see the visu files on your target.
2.If you have redirected the path in the RTE,
set the filepath in the configuration file 'targetvisuextern.cfg' in the Control RTE directory:
[SysFile]
FilePath=d:\Control\
BR
Edwin
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
For everybody a happy 2016.
I have setup me first project with Codesys 3.5 for Codesys 3.5.8 Softmotion RTE 64
But with the Target Visu given me Problems.
She not show images.
On the Engineering System I can see the Visu with frame’s and images but un the Target only
Text , Lines, rectangles.
The Functions behind the frames is on the Target active. (Push Button is working).
This Problem I have with the project written from me but with the Codesys Examples too.
On the Target PC I found me Images on:
C:\Program Files\3S CODESYS\CODESYS Control RTE3\PlcLogic\visu
That means I have send this Data from me engineering PC to the Target PC.
What I doing wrong?
Way the differed between engineering system and Target?
Hi,
this should work without problems.
1.Please check with the codesys filebrowser if you see the visu files on your target.
2.If you have redirected the path in the RTE,
set the filepath in the configuration file 'targetvisuextern.cfg' in the Control RTE directory:
[SysFile]
FilePath=d:\Control\
BR
Edwin
Hi, Thank its working now. ( Ich wuensche noch ein schoenes und Erfolgreiche 2016. Happy New Year and best wish for 2016.)