Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I am working on getting a G308A210 Red Lion HMI functioning within Codesys using the CANopen option card. I had to build the .eds file from scratch and I believe the HMI is ds401 compliant.
so far I am able to send data/signals to the HMI but I cannot receive anything back. I have mapped the PDO to include 64 digital inputs 64 digital outputs 4 analog inputs and 4 analog outputs. the configuration on the HMI is the same.
I have one digital input, one digital output, one analog input, and one analog output mapped in my program for testing.
anyone have any ideas? or any information I can provide to help?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I am working on getting a G308A210 Red Lion HMI functioning within Codesys using the CANopen option card. I had to build the .eds file from scratch and I believe the HMI is ds401 compliant.
so far I am able to send data/signals to the HMI but I cannot receive anything back. I have mapped the PDO to include 64 digital inputs 64 digital outputs 4 analog inputs and 4 analog outputs. the configuration on the HMI is the same.
I have one digital input, one digital output, one analog input, and one analog output mapped in my program for testing.
anyone have any ideas? or any information I can provide to help?
My first guess would be the assembly instance? Maybe unicast/multicast? Do you have eds file?
Have you test to progrsm transmission mode via 1600 and 1A00 sdos?