Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
i buy now the KNX interface from http://www.opternus.com/en/siemens/deve ... 2-pcb.html and use the serial port , maybe in 2 days i make the communication protocol and communication library ,but ai nead help to make the interface for configuration for codesys
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
There is KNX library for Codesys?
I would like to use an external IP Gateway or USB interface.
Best regards
Gianni
i buy now the KNX interface from http://www.opternus.com/en/siemens/deve ... 2-pcb.html and use the serial port , maybe in 2 days i make the communication protocol and communication library ,but ai nead help to make the interface for configuration for codesys
Good Morning
Look vor EIBD or KNXD
This are socket Interface , Daemon and more
https://github.com/knxd/knxd
http://michlstechblog.info/blog/raspber ... interface/
If you have some Solution -> postet.
I am only a User Not a programmer.
Gesendet von iPhone mit Tapatalk