CODESYS - the IEC 61131-3 automation software

Welcome to the official CODESYS Forum
Deutsche Version English version russian version 
It is currently Sun May 28, 2017 5:32 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Tue Nov 01, 2016 7:27 am 
Offline

Joined: Mon Oct 31, 2016 11:58 am
Posts: 2
Hi, i have this Berghof ecc2250 PLC (not beckhof), and its programmed with Codesys V3.5 SP 9 Patch 3.
I am fairly new to codesys, and i cannot find where to setup the opc settings, if there are any.
All other PLC:s i have been using have its seperate OPC settings somewhere to be found.

I have a Kentima HMI Panel which has Windows 7 Embedded, and Kepware comes preinstalled on it.
I cannot find any opc on the Berghof, neither from the HMI Panel, nor from my own computer using tools like MatrikonOPC Analyzer.

The Berghof PLC: http://www.berghof-automation.com/en/co ... ontroller/


Top
   
PostPosted: Tue Nov 01, 2016 5:19 pm 
Offline

Joined: Mon Jun 30, 2014 9:35 am
Posts: 55
Since Kepware has an ongoing market evaluation regarding the need for a Codesys driver I don't think you can talk directly to Codesys from it. To help push for a driver, please fill in and submit this form on their homepage:
https://info.kepware.com/codesys-driver-evaluation

As to your question, I think you will need to use the Codesys OPC Server. The OPC is free of charge and comes with Codesys Developer, maybe you can install it on the Kentima even.

Either way you probably need to add a Symbol Configuration to your Codesys application in the Berghof PLC to be able to choose what variables you want to expose to the outside world.


Top
   
PostPosted: Mon Nov 07, 2016 10:28 am 
Offline

Joined: Mon Apr 11, 2016 2:29 pm
Posts: 13
Hello StefanGr

Maybe try to Modbus TCP on the controller and see you are able to connect from the HMI Panel useing the Modbus Driver inside Kepware.

Another way maybe using OPC UA Client driver on the Kepware, but the you need at setup the Controller as an OPC UA Server, if this is support by your controller (Codesys)

BR
Peter Grote


StefanGr wrote:
Hi, i have this Berghof ecc2250 PLC (not beckhof), and its programmed with Codesys V3.5 SP 9 Patch 3.
I am fairly new to codesys, and i cannot find where to setup the opc settings, if there are any.
All other PLC:s i have been using have its seperate OPC settings somewhere to be found.

I have a Kentima HMI Panel which has Windows 7 Embedded, and Kepware comes preinstalled on it.
I cannot find any opc on the Berghof, neither from the HMI Panel, nor from my own computer using tools like MatrikonOPC Analyzer.

The Berghof PLC: http://www.berghof-automation.com/en/co ... ontroller/


Top
   
PostPosted: Thu Nov 10, 2016 2:55 pm 
Offline

Joined: Mon Oct 31, 2016 11:58 am
Posts: 2
Hi.

I have got OPC-DA working, to the PLC, with my computer, and can browse the tags.
However, the Panel HMI I am using (Kentima), does not seem to be able to install the OPC Server.

The Panel is a windows 7 embedded.

Here is when i start the V3.5 SP9, Patch 3 installer
1.png

And when i modify the installation here i would expect an opc server option


You do not have the required permissions to view the files attached to this post.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited