Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hi,
I'm Stefan and totally new to CODESYS and PROFINET, but hope my question is not too dum.
I try to connect an Endress+Hauser RSG45 via PROFINET to Control Win V3. (GSDML is installed)
I do add the PN-Controller and search for devices. My device is found and I am able to set Name and IP.
That's about as far as I can get. What I see in the "Search devices" window is an error at column "Ident-Nr."
In Device Log, I can see the following error for every "Search"
That's the device info in Repository:
Does anybody have an idea?
Thanks
Stefan
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
I'm Stefan and totally new to CODESYS and PROFINET, but hope my question is not too dum.
I try to connect an Endress+Hauser RSG45 via PROFINET to Control Win V3. (GSDML is installed)
I do add the PN-Controller and search for devices. My device is found and I am able to set Name and IP.
That's about as far as I can get. What I see in the "Search devices" window is an error at column "Ident-Nr."
In Device Log, I can see the following error for every "Search"
That's the device info in Repository:
Does anybody have an idea?
Thanks
Stefan