Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

Target problem

fatmir
2016-05-20
2016-06-01
  • fatmir - 2016-05-20

    Hi,

    I got the program. When I want to open, target returns an error. Program was written by another programmer.
    I do not have problems making himself write.

    best regards
    Fatmir

    IMG: error3.jpg

    IMG: Library manager.jpg

    IMG: error4.jpg

    IMG: error target.jpg

     
  • shooter - 2016-05-30

    you will have to find the target file and put the hardware configuration to it. (however you can load and edit the program without it. it defines where the I/O is.
    the libs , some are open, and free available, some will have to be bought.
    just google them and you will find several on the codesys site.

     
  • fatmir - 2016-06-01

    Ok. I solved the problem.I got it from programmer the target, and I installed.

    IMG: 3.Target.jpg

    IMG: 4.Target.jpg

     

Log in to post a comment.