Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

Open project from PLC

blen86
2016-04-14
2016-04-14
  • blen86 - 2016-04-14

    Hello!

    I have rexroth IndraControl L10 PLC. I need to modify the program (i dont have backup), but i cant "open project from PLC". I have teraget file and can connet to PLC, the process ended here because the ENI server stop me. I try to modify the admin password, or create the new user, but it was not succesfull.Error messages:ENI server [project opject] "Socket is not connected".

    Thanks in advance!

    David

    IMG: ENI sucket.JPG

     
  • shooter - 2016-04-14

    it is not possible to get the original program out of a plc
    20 years ago the plc was a interpreter unit, nowadays it is all compiled in machinelanguage and it is not possible to get the program back, or the original programmer must have saved his program somewhere in the PLC.

     
  • blen86 - 2016-04-14

    Ohh this is sad. Thanks for the reply!

     

Log in to post a comment.